Features

Efficient power supply - other LED tubes are unregulated and run the risk of premature failure with fluctuating mains input. Our LED Tubes have been specifically modified to both withstand transients (spikes) and varied supply input.

Extensive Testing - Other suppliers have run no independent tests on the tubes and rely solely on the Chinese manufacturers specifications - of which are varied and inaccurate.

Real world Luminous Flux Testing -  Comparative testing has been done against standard T8 Fluorescents with the results showing negligible drops in effective light levels and an increase in effective light with certain models.

High compatibility - Testing has been done with various magnetic ballasts which has shown high compatibility, resulting in an easy fit with only the starter needed to be removed.

High efficacy -  Other manufacturers use less efficient LED’s resulting in poorer efficacy, this is compounded by inaccurate reports in the real world luminous flux output.

Compatibility

Our LED tubes are compatible with the vast majority of luminaries with G13 push through holders.

The tubes are designed to run directly off the mains, however they are compatible with the majority of magnetic ballasts and require a simple removal of the starter.

Electronic ballasts will need to be bypassed, and the tubes should not be installed where an electronic ballast is used as it may damage the tube.

CE Approved, tested to standards:

EN 60598-1:2004+A1
EN 60598-2-1:1989
EN 55015:2006
EN 61000-3-2:2006
EN 61000-3-3:1995+A1+A2
EN 61547:1995+A1

General Specifications

Applications

Offices - Ceiling mounted modular fittings
Walkways - Single or Double tube battens with or without diffusers
Signage - Backlit signs etc
Home - Kitchens, Garages & Sheds.